Speedmaster
Showing 81–100 of 518 results
-
#18-D Intermediate Alcolor Rilsan Ink Bridge “Y” Roller 72 Speedmaster
$1.00Catalog #18-D
#73.010.317F
Complete Per Assembly as Pictured -
#18-E Intermediate Alcolor Rilsan Ink Bridge “Y” Roller Early 102 Speedmaster
$1.00Catalog #18-E
#71.010.317F
(Body: 40 11/16 – 1030mm)
(Shaft: 42 9/16 – 1082mm)
(Diameter 2 1/8 – 53mm)
Complete Per Assembly as Pictured -
#18-G Intermediate Alcolor Rilsan Ink Bridge “Y” Roller Later 102 Speedmaster
$1.00Catalog #18-G
#41.010.417F
(Body: 40 11/16 – 1030mm)
(Shaft: 43 3/16 – 1096mm)
(Diameter 2 1/8 – 53mm)
Complete Per Assembly as Pictured -
#18-J Intermediate Alcolor Rilsan Ink Bridge “Y” Roller SM52
$1.00Catalog #18-J
#G2.030.330F
Complete Per Assembly as Pictured -
#18-P Intermediate Alcolor Rilsan Ink Bridge “Y” Roller Bearing Sleeve w/screw Cpl.
$1.00Catalog #18-P
later SM102/S-offset
#71.010.318F -
#19-D Ink Distributor Rilsan – Geared Drive – Geared Distributor Cylinder 72 Speedmaster
$1.00Catalog #19-D
72 Speedmaster #68.009.015F
Uses 19-B Tool to remove
Typically sold without both Journals
Note: Washup Blade Contacts When Washing Up -
#19-E Ink Distributor Rilsan – Geared Drive – Geared Distributor Cylinder Early 102 Speedmaster
$1.00Catalog #19-E
#41.009.015F 1060 mm
#71.009.015F
Uses 19-B Tool to remove
Typically sold without both Journals
Note: Washup Blade Contacts When Washing Up -
#19-J Ink Distributor Rilsan – Geared Drive – SM74
$1.00Catalog #19-J
#M2.009.015
#M2.009.025F
removed by 3 bolts, each side
Typically sold without both Journals
Note: “NO CONTACT” with Washup Blade -
#19-K Ink Distributor Rilsan – Geared Drive – SM72
$1.00Catalog #19-K
#68.009.016F
removed by 3 bolts, each side
Typically sold without both Journals
Note: “NO CONTACT” with Washup Blade -
#19-L Ink Distributor Rilsan – Geared Drive – SM102
$1.00Catalog #19-L
#41.009.016F
removed by 3 bolts, each side
Typically sold without both Journals
Note: “NO CONTACT” with Washup Blade -
#19-P Ink Distributor Rilsan – SM74
$1.00Catalog #19-P
Ink Distributor
#M2.009.025F
Removed by 3 allen bolts or 3 hex head bolts, each side
Typically sold without both Journals
Note: “CONTACTS” Washup Rubber Blade when washing ink unit -
#19-Q Ink Distributor Rilsan – SM102
$1.00Catalog #19-Q
#41.009.015F
removed by 3 allen bolts or 3 hex head bolts, each side
Typically sold without both Journals
Note: “CONTACTS” Washup Rubber Blade when washing ink unit -
#19-R Ink Distributor Rilsan – SM52
$1.00Catalog #19-R
#G2.009.015F
22.” length
removed by 3 allen bolts or 3 hex head bolts, each side
Typically sold without both Journals
Note: “CONTACTS” Washup Rubber Blade when washing ink unit -
#20-C Ink Unit – Ryder Roller A.K.A. Distributor Intermediate – SM74
$1.00Catalog #20-C
#M2.009.111
46mm
Hooked End
Typically sold with Shaft / Bearings / Ends -
#20-D Ink Unit – Ryder Roller A.K.A. Distributor Intermediate – 102 Speedmaster early
$1.00Catalog #20-D
#41.009.211F
45mm 1 3/4”
Typically sold with Shaft / Bearings / Ends -
#20-F Ink Unit – Ryder Roller A.K.A. Distributor Intermediate – 72 Speedmaster early
$1.00Catalog #20-F
#68.009.905F
Note: For S/N’s > 510.064
39 mm (dia)#68.009.211F
45mm 1 3/4”
Typically sold with Shaft / Bearings / Ends -
#20-H Ink Unit – Ryder Roller A.K.A. Distributor Intermediate – SM74
$1.00Catalog #20-H
#M2.009.101
55mm
Typically sold with Shaft / Bearings / Ends -
#21-AA Ink Form Hangers AKA Bearing/Journal SM102 / 72 earlier
$1.00Catalog #21-AA
for red roller
Journal box
#66.010.513F -
#21-BB Ink Form Hangers AKA Bearing/Journal SM102 / 72 earlier
$1.00Catalog #21-BB
for yellow roller
Journal box
#66.010.514F -
#21-E Ink Fountain Clutch A.K.A. Over Running Clutch – SM72
$1.00Catalog #21-E
#91.008.005F
