SM72

Showing 41–60 of 98 results

#27-N Alcolor Main Distributor Journal Trunion – O.S. 102 S-Offset SM72
$1.00
Catalog #27-N
102 S-Offset SM72
Journal Trunion – O.S.
#66.030.028
Note: Journal Fixed
in the Side Frame
#27-O Alcolor Main Distributor Journal Trunion – D.S. 102 S-Offset SM72
$1.00
Catalog #27-O
102 S-Offset SM72
Journal Trunion – D.S.
#66.030.027
Note: Journal Fixed
in the Side Frame
#29-D Water Distributor – Geared – Standard Dampening CHROME 72 Speedmaster
$1.00
Catalog #29-D
#68.030.025
Chrome (Shiny Finish)
Sold Without Journal Ends
#29-M Water Distributor – Geared – Standard Dampening MATTE 72 Speedmaster
$1.00
Catalog #29-M
#68.030.425 F
Matte (Dull Finish)
Sold Without Journal Ends
#31-M Water Form Hanger – SM 72 / 102 early style – Drive Side Lower
$1.00
Catalog #31-M
Drive Side Lower
A Block for Bearing
#93.030.010
B Swiveling Lever
#93.030.002
#31-N Water Form Hanger – SM 72 / 102 early style – Drive Side Upper
$1.00
Catalog #31-N
Drive Side Upper
A Block for Bearing
#66.030.006
B Swiveling Level
#93.030.003
#31-O Water Form Hanger – SM 72 / 102 early style – Operator Side Upper
$1.00
Catalog #31-O
Operator Side Upper
A Block for Bearing
#66.030.007
B Swiveling Lever
#93.030.005
#31-P Water Form Hanger – SM 72 / 102 early style – Operator Side Lower
$1.00
Catalog #31-P
Operator Side Lower
A Block for Bearing
#93.030.011
B Swiveling Lever
#93.03.004
#31-S Water Form Hanger – Alcolor Journal Side Frame Assemblies – SM72 / SM102 Operator Side
$1.00
Catalog #31-S
SM72 SM102
#71.030.232 Operator Side
#31-T Water Form Hanger – Alcolor Journal Side Frame Assemblies – SM72 / SM102 Drive Side
$1.00
Catalog #31-T
SM72 SM102
#71.030.233 Drive Side
#32-N Water Pan – 72 Speedmaster
$1.00
Catalog #32-N
Standard Damp
#68.030.061
#37-G Stream Feeder Board Vacuum Tape w/Hole Patterns – 72 Speedmaster 6x
$1.00
Catalog #37-G
72 Speedmaster 6x
#86.020.029
80” Length
#45-F Ranger Drum – Infeed – Pad Bar – 72 Speedmaster (one piece)
$1.00
Catalog #45-F
#68.013.020 F
CAR – Carborundum Metalized Coating (see item #43-Y for example)
#45-G Ranger Drum – Infeed – Pad Bar – Later 72 Speedmaster (2 pieces)
$1.00
Catalog #45-G
Must Buy Set A+B
A (O.S.) #68.013.030 F +
B (D.S.) #68.013.020 F
CAR – Carborundum Metalized Coating (see item #43-Y for example)
#47-F Gripper Pads – SM72 / 102 Earlier Model 22mm Length – Ranger Drum / Infeed
$1.00
Catalog #47-F
Ranger Drum / Infeed
See group 45
CAR – Carborundum Metalized Coating (see item #46-W for example)
#47-G Gripper Pads – SM72 / 102 Earlier Model 22mm Length – Impression Cylinder Pad
$1.00
Catalog #47-G
mpression Cylinder Pad
#58.011.020 – straight – parallel
#58.711.101 – cross grooved
22mm long
STR – Machined Straight Cross Cut (see item #46-x for example)
DIA-CC – Diamond Cross Cut (see item #46-AA for example)
#47-H Gripper Pads – SM72 / 102 Earlier Model 22mm Length – #1 Transfer Cylinder Grip
$1.00
Catalog #47-H
#1 Transfer Cylinder Grip
#58.011.020 – straight – parallel
#58.711.101 – cross grooved
#58.011.101 – cross groved (older number)
22mm long
STR – Machined Straight Cross Cut (see item #46-x for example)
DIA-CC – Diamond Cross Cut (see item #46-AA for example)
#47-J Gripper Pads – SM72 / 102 Earlier Model 22mm Length – Double Drum Cylinder w/ and w/o perfecting
$1.00
Catalog #47-J
Double Drum Cylinder
with and without perfecting
#58.011.020 – straight – parallel
#58.711.101 – cross grooved
22mm long
STR – Machined Straight Cross Cut (see item #46-x for example)
DIA-SC – Diamond Straight Cut (see item #46-Y for example)
#47-K Gripper Pads – SM72 / 102 Earlier Model 22mm Length – # Transfer (After Double Drum = Straight Printing)
$1.00
Catalog #47-K
#3 Transfer
(After Double Drum – Straight
Printing)
#58.011.020 – straight – parallel
#58.711.101 – cross grooved
22mm long
STR – Machined Straight Cross Cut (see item #46-x for example)
DIA-SC – Diamond Straight Cut (see item #46-Y for example)
#47-L Gripper Pads – SM72 / 102 Earlier Model 22mm Length – Impression Cylinder Newer Version of #47-G
$1.00
Catalog #47-L
Impression Cylinder,
Newer version of #47-G
Early
22mm Long
STR – Machined Straight Cross Cut (see item #46-x for example)
DIA-SC – Diamond Straight Cut (see item #46-Y for example)